A Aspen company - serving Enterprise, NV
Aspen Attic Insulation Enterprise insulation team

Wall Insulation Cost in Enterprise - Free Estimate, Written Price Up Front

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 761-9996

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates

How Much Does Wall Insulation Cost in Enterprise?

Wall insulation in Enterprise typically costs between $1,200 and $4,800 for a whole house, with most single-story homes landing near $2,600 for blown-in cellulose in exterior walls. The price moves with square footage, how many walls are open, and whether you’re choosing fiberglass, cellulose, or spray foam. Interior walls on a standard tract home in the older parts of Enterprise run toward the low end; a large two-story near the Mountains Edge side of town can push past $5,000 when spray foam goes into an exterior cavity.

Our technicians have up to 24 years of experience working on Desert Southwest homes, and wall insulation is one of the jobs we get called back to most often when a previous installer guessed instead of measuring. A wall cavity here is either empty or full of the wrong product 90% of the time. We put a written price in front of you before anyone picks up a drill, and every technician’s name and photo is sent to you before the visit – so you know exactly who’s coming to the door. Call (844) 761-9996 for a free estimate.

Key Takeaways

  • Typical whole-home wall insulation in Enterprise: $1,200-$4,800, averaging around $2,600.
  • Blown-in cellulose in existing exterior walls: $1,000-$3,200 for most homes.
  • Closed-cell spray foam in a smaller wall section: $1,800-$4,200 for a 1,000-1,200 sq ft home.
  • Retrofit into open walls saves money vs. drilling through finished drywall.
  • Every price is written before work starts, backed by our 365-Day Done Right Promise.

Wall Insulation Cost Breakdown (2026)

Here’s how the numbers stack up for a typical Enterprise home in 2026. Prices reflect the local market and include labor, materials, and cleanup. They do not include drywall repair, which we quote separately if you want us to handle it.

Scope of Work Typical Range Notes
Blown-in fiberglass in exterior walls (existing home, drilled and patched) $1,400 – $3,600 Most common job we run in Enterprise
Blown-in cellulose in exterior walls (existing home) $1,000 – $3,200 Denser than fiberglass, better in desert heat
Closed-cell spray foam, exterior walls only $1,800 – $4,200 Highest R-value per inch, tightest air seal
Open-cell spray foam, interior walls (sound dampening) $1,200 – $2,800 Common for bedrooms and home offices
Fiberglass batts in unfinished garage or new construction walls $600 – $1,800 Lower cost when the wall cavity is already open
Drywall patch and texture after drilling $400 – $1,200 Add-on, quote per room
Whole-house package (all exterior walls, standard 1,500-2,200 sq ft home) $1,200 – $4,800 Average falls near $2,600

What pushes the price up? A few things, and none of them are mysterious. Spray foam costs more per square foot than cellulose or fiberglass, but it also seals the cavity so tightly that air leaks through the wall stop. Houses in Enterprise with brick veneer or stucco take more labor to drill and patch than wood siding. And any home built before 1985 in Enterprise may have wall cavities with no fire blocking, which means more drill points per room. If the cavity is already open because you’re doing a remodel, the job costs noticeably less – you’re paying for insulation, not for reconstruction.

What brings it down? A single-story ranch with wide wall spacing (16 inches on center, common in Enterprise) is faster to fill than a 24-inch spaced cavity with tight turns. A home where a previous installer already access-paneled the wall saves drill time. And choosing fiberglass over spray foam keeps the material line lower. For a full picture of the service itself, see wall insulation in Enterprise.

What Affects Wall Insulation Pricing in Enterprise

  • Home size and wall count. A 1,200 sq ft single-story in Enterprise has less exterior wall than a 2,400 sq ft two-story, and the price tracks the wall area, not the floor area. Most homeowners assume square footage is the whole story; it’s about half.
  • Wall material. Stucco and brick veneer on the outside means more careful drilling and patching than wood or fiber cement. Enterprise has plenty of both, and the stucco jobs take roughly 20% more labor time.
  • Cavity condition. Empty cavities are the best case. If a previous installer left fiberglass batts sagging in the wall, those have to come out before new insulation goes in, which adds a removal charge.
  • Climate demands. Enterprise swings from summer highs near 100°F to winter mornings in the 30s, and that range makes wall R-value matter more than it does in a mild coastal climate. Homes here benefit from R-13 to R-15 in 2×4 walls and R-21 in 2×6 walls, and choosing the tighter option costs more but performs better across both seasons.
  • Access and layout. A finished interior with furniture, closets against exterior walls, and tight attic access for hose routing adds time. We quote the access plan before we start so there are no surprises.
  • Material choice. Fiberglass batts sit at the low end, cellulose in the middle, spray foam at the high end. We carry Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber, so the material matches the wall instead of whatever happens to be on hand.

How to Save on Wall Insulation

A few practical moves cut the number without cutting the performance:

  • Bundle the wall job with attic work. If your attic insulation is also thin, having both done on the same visit saves the return trip and the setup. See attic insulation in Enterprise for what that looks like.
  • Choose cellulose over spray foam where it fits. In walls that don’t need an air barrier, cellulose blown dense does most of the work at a lower material cost.
  • Insulate during a remodel. If you’re already opening a wall for plumbing or electrical, adding insulation at that moment costs a fraction of a retrofit.
  • Do the exterior walls first. Interior walls are nice for sound, but exterior walls carry the load for energy bills. Skip interior walls this year, add them later if you want.
  • Get a free estimate and a written price. This is a place where a written quote from one company should be comparable line-for-line to another. Call (844) 761-9996 and we’ll put the numbers in front of you before you commit to anything.

One word on DIY: blowing insulation into a wall cavity from the outside is not a weekend project. The equipment, the density control, and the patch work all need to be right, or the wall performs worse than it did empty. This isn’t a “we want your money” warning – it’s that we’ve fixed enough jobs where a homeowner tried and the cavity ended up half-filled. Better to have us measure and price it. If you want to understand what “done right” looks like in the trade, see blown-in insulation in Enterprise.

Newer to the area? We also handle spray foam insulation in Enterprise for homeowners who want the tightest possible wall, and insulation removal in Enterprise where old material has to go before new goes in. If you’re in a neighboring community, we work with technicians in Henderson, Las Vegas, North Las Vegas, Summerlin, Paradise, Spring Valley, and Boulder City. All of them follow the same written-price and guarantee standard we run here.

FAQs – Wall Insulation Cost

How much does wall insulation cost in Enterprise for a typical 1,800 sq ft home?

Expect $2,200 to $3,400 for blown-in cellulose in all exterior walls on a 1,800 sq ft single-story Enterprise home. That’s the middle of our local range and the number we quote most often. Spray foam on the same home runs $3,000-$4,800. Call (844) 761-9996 for an exact quote – estimates are free.

Is it cheaper to repair or replace wall insulation?

Replace. Once wall insulation has been compressed, water-damaged, or settled away from the cavity, patching it rarely works because the new material doesn’t bond to the old. A full replacement in a typical Enterprise home costs $1,000-$3,200, and a “repair” on sagging material typically costs 60-70% of that anyway. Replace and be done. Call (844) 761-9996 and we’ll tell you which one your wall actually needs.

Can you insulate walls in Enterprise without tearing out drywall?

Yes. We drill small holes between studs from the exterior, blow insulation into the cavity, and patch the holes. On stucco walls, patches are textured to match. The typical jobs runs $1,000-$3,600 depending on wall area and material. The wall stays in place and you never lose a day of living inside the house. Call (844) 761-9996 for a written price before we schedule.

How long does wall insulation take in Enterprise?

Most single-story homes are done in one day, usually 4 to 8 hours. Two-story homes or homes with stucco on multiple sides sometimes run into a second day, which we’ll tell you before we start. There’s no extra “rush charge” – the price you’re quoted is the price you pay. Call (844) 761-9996 to find the earliest slot.

What’s included in the price?

Materials, labor, cleanup, and the 365-Day Done Right Promise – in writing, covering labor and materials for a full year, with a free second visit if a repair fails. Drywall patch and texture are quoted as a separate line so you can see exactly what’s what. No hidden fees, no post-job surprises. Call (844) 761-9996 for a free estimate.

Do you offer a guarantee on wall insulation?

Yes. Every wall insulation job in Enterprise is covered by our 365-Day Done Right Promise. If something isn’t right within a year, we come back at no charge – and if a repair fails, the second visit is free. The guarantee is written, not verbal. Call (844) 761-9996 and we’ll send you a written price and the guarantee terms before any work begins.

Will wall insulation lower my energy bills in Enterprise?

In most Enterprise homes with empty exterior walls, yes – often by 10% to 20% on summer cooling. The exact number depends on how much wall was empty to begin with and how your attic looks. We quote the wall job on its own and, if you want, bundle the attic into the same visit for a lower total. Call (844) 761-9996.

If your wall cavity was empty, the difference after filling it is noticeable. A home in Enterprise that reads 86°F inside at 4 p.m. in July often pulls down a few degrees after the walls are filled and the attic is topped off. That’s the case for doing both. Browse our home page for the full service list, or read about insulation cost in Enterprise for comparison pricing across all three services.

Pricing reflects the Enterprise market as of 2026. Aspen Attic Insulation Enterprise offers free estimates – call (844) 761-9996.

Written by the team at Aspen Attic Insulation Enterprise.

What Our Customers Say

★★★★★ 5.0 from 8+ reviews

"The estimate was clear on R-value and cost per square foot. No add-ons."

- Omar N.

"Blown in cellulose up to R-49 in the attic. Tech badged in at the door and measured the depth with a ruler before and after. Upstairs bedrooms stopped being an oven."

- Fran T.

"Vetted crew, which I liked. Installed baffles at the eaves so the vents stay clear."

- Sonia B.
Need Insulation help in Enterprise? Licensed & insured · 60-minute response · free estimates
Call (844) 761-9996

Request a Free Estimate

Tell us what's going on in Enterprise. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Local Service Coverage
Call Now - 24/7 Dispatch